Whether in solo use on steep slopes or in the mower combination on large areas. Whether with versatile oscillating linkage or powerful 3D headstock. Fendt Slicer front mounted mowers harvest forage quality wherever they are used.
The diverse model range of Fendt Slicer front mounted mowers offers solutions for every harvesting condition in all meadows – regardless of location. Each model is characterised by outstanding cutting quality, reliability and the decisive technological advantage for optimum forage harvesting. Thanks to this variety, at Fendt you will find exactly the front mounted mower that perfectly suits your needs:
Slicer Fendt F series with flexible oscillating linkage
Slicer Fendt FQ series with powerful 3D headstock
Slicer Fendt Alpine series with oscillating linkage or rigid compact linkage
Discover our front mounted mowers with the Fendt factor.
Front attachment with oscillating linkage
Fendt Slicer mowers with oscillating linkage are the all-rounders among front mounted mowers. Through the cooperation of all properties, they play out their advantage in flexibility - both in the conditions of use and in the regions of use. They score with their optimum combination of compactness, easy traction and ground hugging and are all-rounders both solo and with rear mowers.
On all fields at home.
Noticeably more efficiency
A new generation of oscillating linkage, innovative cutter bar technology and intelligent comfort details – these are the distinguishing features of the current 310 Slicer series. This interaction allows significant time savings in the entire harvesting process with high forage quality and the possibility of fuel-saving mowing. With the increased working width of 3.10 m, the compact mowers achieve more area output than their predecessors with less weight.
“The Slicer disc mowers cut the stalks cleanly in all conditions (standing crop), even with very low growth. The oscillation paths of the mowers (front +/- 7.5°, rear +30°/-19°) were also sufficient when driving through hollows and small ditches. Here, the cutter bar with its construction depth of almost 50 cm guided the blades cleanly over the ground.”
The Fendt Slicer FQ models with 3D headstock are designed for maximum performance. All innovative and constructive factors combined, these machines achieve unrivalled adaptability to the harvesting conditions. They unfold their full potential particularly in combination with powerful rear mowers.
Ground hugging without compromise
Three-dimensional ground hugging is not just a phrase with this front mounted mower. The kinematics of the trailed mower are superimposed in the transverse and longitudinal directions and thus adapt precisely to the ground contour, even at high working speeds. This allows you to achieve a perfect cutting pattern even in hilly terrain. Your advantage: High-quality forage without contamination and soil damage – even under the most difficult conditions.
The FQ front mounted mowers with working widths of 3.10 m or 3.60 m, which have been redesigned from the ground up, offer a wide range of professional technical features that support effective harvesting in the toughest conditions. The trailed cutting unit with its forward-mounted traction point not only ensures a large range of movement, but also easy traction and fuel savings. These unique mowers are characterised by absolute power, maximum forage yield and optimum ground hugging. They really come into their own in combination with the Fendt ISOBUS butterflies.
In combination with the PRO models of the latest generation of butterfly mowers, the Slicer FQ front mounted mowers offer a unique combination of maximum area coverage, maximum comfort and smart farming. Thanks to the innovative ISOBUS solutions, the intelligent rear mowers integrate and control the front unit. This means that the entire combination benefits from the pioneering technologies of large-scale mowers.
Automatic conditioner control
In combination with the Slicer ISOBUS mower combinations, the FQ front mounted mowers are in a completely different class. The DLG-award-winning automatic intensity control of the tine conditioners can be transferred to the Fendt FQ front mounted mower via the ISOBUS control system. The control system is controlled by the intelligent rear mowers and thus ensures that the dry matter in the forage is always homogeneous.
Automatic side movement
The side shift of the front mower on slopes and banks no longer needs to be controlled manually. Dependent of the angle of the mower combination or the tractor's steering angle sensor, the side shift is carried out automatically using ISOBUS to ensure the correct overcut.
Speed-dependent contact pressure control
In the ISOBUS versions of the mower combinations, the TurboLift hydropneumatic cutter bar relief system has an automatic function that is dependent on the working speed. The ground pressure is regulated very precisely and in three intensity levels – also by the FQ front mounted mower with corresponding equipment.
To meet the high demands of farmers in alpine regions, Fendt offers the disc mowers of the Slicer 200 series. These are impressive with their compact attachment and therefore close centre of gravity for optimum track stability on extreme slopes.
The summit strikers for the perfect cut
With oscillating linkage or rigid compact attachment
To achieve the best results even in difficult terrain, you need adapted technique. The compact front mounted mowers Slicer 260 FP and FPS with oscillating linkage and Slicer 210 FKS and 260 FK with rigid compact linkage have been specially developed for the demanding requirements of alpine farmers. The short-mounted mowers are characterised by their lightweight and compact design. This enables better track stability and less load on the rear axle and thus also more safety on slopes. With the standard change gearbox, they are suitable for tractors with both left-hand and right-hand front PTO. A 540 rpm or 1,000 rpm drive is also possible.
Fendt Slicer 260 FP and 260 FPS with oscillating linkage
The cutting unit is characterised by a oscillation path of +/- 4.5°, which ensures excellent ground hugging. Its special design enables particularly compact mounting and a close centre of gravity to the tractor, resulting in very high stability. Thanks to the suspension in the centre of gravity and the centring by spring force, the cutting unit is prevented from rocking during transport and a high level of safety is guaranteed when driving on the road. The folding side guard also ensures compact transport dimensions with an outside width of just 2.50 metres.
Fendt Slicer 210 FK-S and 260 FK with rigid compact linkage
The rigid compact linkage of the Fendt Slicer 210 FK-S and 260 FK is characterised by a very short direct attachment, which places the centre of gravity very close to the tractor. Optimum ground hugging is achieved thanks to a oscillation path of +/- 9°. A spring-loaded collision guard protects the cutting unit in the event of collisions with objects, while the folding side guard results in compact transport dimensions of just 2.05 m or 2.50 m, ideal for narrow mountain roads and dirt tracks.
Perfect slope mowing
The 210 FKS and 260 FPS slicers are available with mechanical or hydraulic lateral displacement. With a steplessly variable displacement of 42 cm in total (+/- 21 cm to the left and right), you can easily master mowing on slopes and use with twin tyres, while the parallelogram headstock and Kennfixx hydraulic connections ensure maximum efficiency and easy handling.
More about the Fendt Alpine series
Work efficiently and safely in any environment and produce high-quality forage for your animals in regions where others go on holiday. The picturesque surroundings take their toll on both man and machine. That's why you work with your experience and the Fendt mowers specially adapted to alpine conditions.
Our mission: machines that enable you to achieve maximum harvesting success in short time windows. We have what you need: Discover the variety of Fendt green harvest technology with the Fendt factor!
Are you still looking for the right tractor for your implement? Fendt tractors have stood for quality, reliability and innovation in agriculture for decades. Whether mowing, tedding or raking – experience the unique driving experience with the continuously variable Fendt Vario transmission.
Would you like some advice and are still looking for a Fendt dealer near you? With our dealer search, you can quickly and easily find the right partner for your needs. Simply enter your postcode or town and all Fendt dealers in your area will be displayed.
At Fendt, you can also count on top-class services and support in the digital environment. From Fendt Connect as a central telemetry solution to a news app, Fendt offers a variety of digital applications. Here you will find a selection of helpful apps for your everyday life.
